翻译贴：文章超级改写法

Yao

文章超级改写法

原文地址: http://advertcn.com/viewthread.p ... 26amp%3Btypeid%3D54 by jxau00001, 2012-1-4 20:05.

Keep this in VIP. Do not go around telling everyone to use this method. It's better for us if everyone is using crappy spins so ours look better. I personally hate the tediousness of doing manual spinning and hate the crappy single article spins so I came up with a better way that works for me. If you have anything to add or don't agree please say so, so we can make it even better.

不要把这篇文章传到VIP区以外，不要去告诉所有人使用这个方法，如果别人都用的是蹩脚的改写文章的话对我们最有利了。我个人非常讨厌做乏味的手动改写，也不喜欢那些单篇蹩脚的该写文章，所以我想出了一个对我来说更好的方法。如果你有什么愿意加上来，或者不同意我所说的话，请讲出来，我们可以做得更好！


Step 1: First thing you're going to need are a couple of programs. You will need a spinner (I use TBS so this will be centered around that) and GAP (get article pro), which you can find in the BST section of BHW, for article scraping.

第一步:第一件你要做的事情是找到这几个程序。你会用到spinner（改写程序）(我用的是TBS,所以这次会以它为中心)，和GAP(文章获取专家),这个你能在ＢＨＷ论坛的ＢＳＴ板块找到，它是用来搜刮文章的．


Step 2: Now that you have GAP we're going to need articles. Search for articles using the keywords you want to target and start scraping. The program can scrape thousands of articles. I like to only target the big sites to scrape that I know don't allow spun content. You don't want to spin spun crap.

第二步：现在你有了ＧＡＰ，我们要去弄文章了。按照你想要对准的关键字搜索文章然后开始搜刮吧！这个程序可以搜来数以千计的文章。我喜欢瞄准那些我知道他们不允许改写内容的大型网站来搜刮，你不会想要一些垃圾的改写文章的，对吧？


Step 3: Next, once you have the articles scraped we're going to do some bulk spinning with TBS. Make sure that before you do this you setup your protected words and you put in any words in your favorites that we will spin later.

Select the bulk spin function in TBS. Go to the folder that contains a bunch of the articles you just scraped. Choose auto select synonyms. Pick phrases only and every third phrase. Spin away.

第三步：下一步，当你搜刮来文章之后，我们要开始用ＴＢＳ做一些大量的改写工作。记住在这样做之前，确保你已经设置了ｐｒｏｔｅｃｔｅｄ　ｗｏｒｄｓ（受保护文字）以及在“你的喜好”里输入一些文字，这是之后我们改写要用到的。

选择ＴＢＳ里的大量改写功能，进入含有你搜刮来的大量文章的文件夹，选择“自动选择同义词”，只挑选短语（每三个短语）进行改写。


Step 4: Once that is done you'll want to do a bulk spin again with your favorites so make sure you remove your protected terms first. Bulk spin the same articles with your favorites. When done put your protected terms back in and do the same thing but with everyone's favorites. Leave it at best because the lower levels usually suck.

Now you should have a ton of articles with single level spins. What we're going to do next is paragraph spinning (you can do sentence spinning if you want but I think paragraph spinning comes out more readable).

第四步：当上一步完成后，你要进行再次的大量的改写，这次是与设置的“我的喜好”相关的改写，所以要记得移除掉那些ｐｒｏｔｅｃｔｅｄ　ｔｅｒｍｓ（受保护内容）。这一步完成后，再把受保护内容放回来，再次改写，但这次使用的是ｅｖｅｒｙｏｎｅ＇ｓ　ｆａｖｏｒｉｔｅｓ（所有人的喜好）。要设置在“最好”那一档次上，因为低档次的文章实在是弱爆了。

这样经过单一级别的改写，你应该已经拥有许多的文章了。我们接下来要做的是段落改写（如果你愿意的话你也可以做句子改写，但我认为段落改写出来的效果可读性更好）。


Step 5: Go back to GAP, under addons select spintaxer. For the settings select use paragraphs. I put anywhere from 5-7 depending on how many paragraphs I want in the article. Select Min words and use around 40. Spintax size will be the number of paragraph spins per paragraph. I use from 5-20 depending on how many sites I will be posting out to. For articles you can put a big number in there and the program will run until all the paragraphs are used up. Next select Use Uniques.

第五步：回到ＧＡＰ，在“插件”那里选择“ｓｐｉｎｔａｘｅｒ”，在设置里选择“段落”。根据文章里有多少段落我一般输入５到７的数值。在“最少词数”那里选择大概４０。“Ｓｐｉｎｔａｘ　ｓｉｚｅ”指的是每段被改写的段落次数，根据有多少站点我会去发文章，我一般选择５到２０的数值。在“文章”那里你可以输入一个较大的数字，程序会一直运行知道你的段落用光了，之后选择“Ｕｓｅ　Ｕｎｉｑｕｅｓ＂。


Step 6: Click import files and select all of your articles that you just spun. Click spintax and bam you just created a bunch of spun articles with paragraph, phrase, and synonym spins.

If you want to have better intro paragraphs you can select content mixer and go through the articles and select first paragraphs. Then go through them and save them and spin those paragraphs together.

第六步：点击导入文件，选择你刚刚改写好的所有文章。点击“ｓｐｉｎｔａｘ”然后“磅”地一下，你就创造出了已经用段落，短语和同义词进行了改写的文章。

如果你想要更好的介绍段落的话，你可以选择“ｃｏｎｔｅｎｔ　ｍｉｘｅｒ”然后去文章里选择第一段。然后再保存这些第一段，然后把那些段落一起进行改写。


Step 7: Last item. You want a bunch of unique titles to use now with those articles. You can do this different ways. You can scrape them or do what I do. I use a software program that allows me to copy all of the filenames. Don't remember where I got it. I highlight all of the files I scraped, right click and save the file names.

I then take those titles and throw them into TBS. These I usually manually spin and use my favorites. Sometimes I use the autoselect synonyms. It's just personal choice. You should already have a ton of related titles so don't go crazy and use crappy titles. We want good titles for the articles.

第七步：最后一步了！你还想要很多的独特题目来配合那些文章吧！你可以用不同的方法来做，你可以搜刮过来，也可以按我的做法来做。我使用一个程序来复制左右的文件名，别忘了我是从哪里得来的，我高亮了所有我搜刮来的文件，右键点击然后保存文件名。

之后我取出那些标题然后扔进ＴＢＳ里去，对标题我只进行手动改写，使用“我的喜好“。有时我还用“自动选择同义词”，不同人有不同的选择罢了。你应该已经有了超多的相关标题，所以可别犯傻地去用那些垃圾标题。我们总是想给文章配上好的标题的。


And now you're done. You should have a ton of superspun articles with a ton of unique titles for them.

Let me know what you think or if you have any ideas you want to add or problems you see with my method.

Happy spinning!

现在完成了！你应该有“成吨”的超级改写文章，而且还有“成吨”的独特标题与之配套。

如果你有什么想法想加进来，或是觉得我的方法有什么问题，记得告诉我哦。

改写愉快！

Yao

内容摘要：本文讲述的是如何进行文章超级改写的方法，用到的工具有TBS，GAP等，探讨了如何从同义词，短语，段落到首段，标题进行全方位深层次的改写。原文地址：http://advertcn.com/viewthread.p ... 26amp%3Btypeid%3D54，谢谢！